This past winter has made known peaks of very low temperatures, outside the normal seasonal average, that even for a limited period, they put us in difficulty. In some municipalities, in fact, it was necessary to issue permits to increase the ignition time of heating has already been programmed.
It was certainly an exceptional case, but certainly capable of upsetting what is the normal programming and design of a heating system.
To overcome moments like this, you may think you have additional solutions to the heating, to use if necessary, such as stoves and fireplaces.
MCZ presented at Fire Project in 2012, held in February in Verona, the new stoves Tube and stubs , respectively, pellet and wood, designed by the team Emo Design .
A project that has marked the long-standing collaboration between the design team and the competence technological progress.
The pellet stove Tube has a circular shape and compact size (just 52 cm in diameter), which make it an original segment of pellet stoves, and closer to the aesthetics of wood stoves Nordic tradition.
This is predominantly due design, which replaces the jets for air to escape with a peripheral slot , located between the camera body and the top aluminum cone. And it is this detail that brings the wood-burning stove models.
The stove is addressed to a young and dynamic user has the option to choose which version best suits your decor, thanks to the various colors available, among which one in bronze , obtained thanks to a special coating.
Stub instead represents a revival of the classic Nordic-style wood stove , with details that make it a more marked Made in Italy.
From the technical point of view, with this model, MCZ presents for the first time, a heater at accumulation , that is a stove with a refractory mass located above the hearth, which accumulates part of the heat releasing it gradually, thus increasing performance and reducing the consumption.
Also in this case, the design is clean and essential, also thanks to the adjustment ring of the entrance of the air which has been integrated in the machine body with a push and pull system which allows to keep the outside surface of a linear.
Oekotherm Alto Adige is a company for over 30 years as a leader in high-efficiency stoves and fireplaces, thanks to being the exclusive distributor of brands such as Germany's foreign Skantherm and British Stovax .
The common denominator is the company's products offer environmentally friendly solutions, with an eye to fuel economy, but always with cutting-edge design.
For example, to optimize space more and more precious in modern homes, offers a new series of chimneys Riva Study of Stovax, which have a total depth of just 35 cm, however, and offer a spectacular view of the fire, thanks to an innovative combustion technology.
The longest of the fireplaces of this series (133 cm) has a flue of just 150 mm, to emphasize the high quality of combustion and can be installed in homes where up to now was impossible.
These fireplaces can also be customized with a wide range of frames and profiles are available, as well as wood also gas (methane or LPG).
But Oekotherm also propose the stoves-Fireplace line Skantherm Fireworks , representing the collection of the most award-winning design of stoves in the world, with names such as Antonio Citterio and Sieger Design .
These stoves are not excellent, however, only for the design, but also from a technical standpoint. In fact you can provide them internally of Thermostone accumulation of stones and can be supplied with the German certification DiBt , for installation in CasaClima and passive houses, with values and particulate emissions are already below the most stringent standards, including those planned for the future.
Share your Study Materials with us : 