This is mechanical project report on "portable charger using wind energy". wind power is the conversion of wind energy into a useful form of energy, such as using wind turbines to make electricity, windmills for mechanical power, wind pumps for water pumping or drainage, or sails to propel ships. There are two primary physical principles by which energy can be extracted from the wind; these are through the creation of either lift or drag force (or through a combination of the two)
The principle used in this project is that "a wind generator´s rotating blades convert the wind´s kinetic energy into rotational momentum in a shaft. The rotating shaft turns an alternator, which makes electricity. This electricity is transmitted through wiring down the tower to its end use. The blades use engineered airfoils, matched to the alternator, that capture the wind´s energy. Most modern wind generators use three blades, the best compromise between the highest efficiency possible (one blade) and the balance that comes with multiple blades.
For documentations..post ur comments for more projects
contact us: suhale@vidyarthiplus.com and projects@vidyarthiplus.com
The principle used in this project is that "a wind generator´s rotating blades convert the wind´s kinetic energy into rotational momentum in a shaft. The rotating shaft turns an alternator, which makes electricity. This electricity is transmitted through wiring down the tower to its end use. The blades use engineered airfoils, matched to the alternator, that capture the wind´s energy. Most modern wind generators use three blades, the best compromise between the highest efficiency possible (one blade) and the balance that comes with multiple blades.
For documentations..post ur comments for more projects
contact us: suhale@vidyarthiplus.com and projects@vidyarthiplus.com
